Hardware

If any Samsung Android Phone get Stuck at logo, it can be either due to Software or Hardware.

Software: can be done either through flashing or by Hard Reset.

Hardware: can be done through UFI or Easy Jtag Plus.

Software: Tools & Software Required

• Hard Reset: Using combination like Power + Volume UP + Menu works in most of the samsung android phones for Hard Reset. Wipe Data then Select Wipe Cache Partition.
•  Flashing: using Samsung Android Flash File almost any samsung android phone can be flashed using odin tool.
• Both the process can help you to recover phone from Boot Logo.

Hardware: using UFI Box.

• Check Log report of the device. If it is ok, then check Health Report.
• If health report shows 90 percent consumption then make GP Partition.
• Else check Nand Test.
• Now, Make backup of Dump (128 MB) & Security.
• Erase & Format Emmc.
• Then use Backup file to write Dump & Security.
• Now, you have to flash the phone using Odin tool.
• This process works on 90 percent of the device.

Using Hardware techniques, to repair Samsung Android phone. RepairMyMobile runs Training Programs.

Redmi 6a Baseband unknown can be either Hardware or Software.

Mostly, the issue is of Hardware.

But in case of software, you had to flash with its latest version File to restore baseband. In a case, if it fails then it can be resolved by Hardware.

Demo pic of Reballing & making Jumper:

1- Reball MT6177MV.

2- Make a Jumper under IC to the Greenish layer as in the pic.

Afterwards, device will regain its Baseband.

This post cover all aspects which will guide you to Unlock Pattern or Reset Gmail account of Oppo F11 Pro.

In order to do so, you will need Hardware expertise (Jumper) with UFI or Easy Jtag Plus.

Steps to Unlock Pattern or Gmail of Oppo F11 Pro:

1- First you have to Look out for ISP Pinout of Oppo F11 Pro.

2- Then make jumper from Dato, CLK, CMD & GND to ISP Adapter then connect Adapter to UFI Box.

3- Now, switch to UFI Emmc Toolbox interface and click on Identify Emmc. If the Jumper has done properly, then ufi interface will display Android System info.

4- Then, Switch to USERAREA Part which will be on top left side.

5- Click on Special Task and Select Oppo[Master Clear]. Out of the option appearing, choose Wipe Data & App Data.

6- When UFI log display, Oppo[Master Clear]…Done.

7- Device has been unlocked.

8- Remove Jumper & assemble ISP to the phone.

9- Switch on device.

Karbonn Vista 4G was working fine but all of sudden phone fails to boot.

Using Multimeter I had checked the supply, which was 1.4v and then dropping to 0.

Solution: We had reball Emmc then reprogrammed with UFI then by Miracle we had flashed the phone.

• Remove the backside cover and open the board.
• First, you have to check where emmc exist on the PCB. Then remove it carefully.
• You have to clean the board carefully (Use thinner or chemical that do not harm your PCB).

[Read more…] about Karbonn Vista 4G dead recover by reballing EMMC

In this post, we had used Easy jtag box to unlock Mi account of Redmi 6 Pro using ISP Pinout.

It can be unlocked online through Authenticated id or using Credit of any professional box like UFI, Umt etc.

The following steps to you do follow and learn them:-

• Open backside cover of the Redmi 6 pro & make jumper as in the image.

[Read more…] about Redmi 6 Pro Mi account Unlock through ISP

Here we will provide a solution to recover LYF Jio f90m from dead state.

Fault Finding: Easy steps to find fault is to charge up the phone & whatever component is getting heated. That component has to be replaced.

Note: You can buy Jio Battery with 3 Month Warranty at Minimum price as compared to the Market or Online rate.

This can work in some of the cases.

Situation 1: LYF F90m dead By Drop Down. 

In this case, mobile has been dropped down to the surface & fails to boot.

we had tried out Reballing of emmc & the mobile has come back to life.

[Read more…] about LYF Jio F90m Dead Solution