LYF Jio LF2403n Flash File (Stock ROM)

Download LYF Jio LF2403n Flash File to install KAIOS OS on your phone.

• LYF-LF2403N-001-02-45-240221
• LYF-LF2403N-001-02-27-180919 (Latest 2020 Flash File)
• Qfil Tool

Note: Steps to Enable Diag Port in Jio Phones

Boot Key: “* & #”

How to Flash LYF Jio LF2403n:

1- Download LYF LF2403n Flash file which consist of File, tool & Driver.
2- Install Driver
3- Connect Phone in OFF mode to cross check driver installation & Press Boot key * & # while connecting. It will make port named “Qualcomm HS-USB Diagnostics 9008”
4- It means driver has been installed successfully.
5- Install Flash Tool, which will install shortcut on Desktop named QFLASH Tool.

6- Connect phone & Click on Load Content and from Flash File Folder select Content.xml

7- It will show Port in tool.
8- Click on Download Content to start Upgrading.
9- Wait till done appears.
10- After upgradation, device will shift to download mode.
11- Disconnect Phone & reinsert battery.

If flashing Fails or does not start, then there must be a gap between the words while choosing flash file. Rename the folder.

As in Qualcomm Flashing, there must be no gap in between the words.

jio new should be replaced by jio_new or jionew.

Download LYF JIO F50y Flash File to install KAIOS OS on your phone.

• LYF-F50Y-001-03-28-280322
• LYF-F50Y-001-03-26-201221  (Password Protected: Buy Now)
• LYF-F50Y-001-03-20-010421 (Password Protected : Buy Now)
• LYF-F50Y-000-03-05-231019  (Latest 2020 Flash File)
• Huiye Flash Tool

Note: Steps to Enable Diag Port in Jio Phones

Boot Key: Center Key or Volume Up+ Down + Power

 

How to Flash LYF Jio F50Y:

1- Download LYF F50Y Flash file which consist of File, tool & Driver.
2- Install Driver
3- Connect Phone in Off mode and Press Boot key Up Dpad+ Down Dpad or center key to cross check driver installation. It will make port named “Qualcomm HS-USB Diagnostics 9091”
4- It means driver has been installed successfully.
5- Install Flash Tool named Huiye Download Tool for Reliance (After Sales).

6- Click on Select and assign path of firmware
7- It will show 6 file in it, select Get_backup0 (You can select any of them).

8- it will then display the Flash File folder path
9- Connect phone which will enable Download button.

10- Software Upgrade starts.
11- On its completion, Violet area will turn into green and will display a message “Pass” .

If flashing Fails or does not start, then there must be a gap between the words while choosing flash file. Rename the folder.

As in Qualcomm Flashing, there must be no gap in between the words.

jio new should be replaced by jio_new or jionew.

Download LYF JIO F90m Flash File to install KAIOS OS on your phone.

• LYF-F90M-000-03-51-141221
• LYF-F90M-000-03-31-121219  (Password: Lyff90m00_Repairmymobile)
• QFlash Tool
• LYF-F90M-000-03-30-101019

Note: Steps to Enable Diag Port in Jio Phones

LYF JIO F90m QCN File Tested:

• Jio_F90m_QCN

Password: RepairMyMobile.in_F90mqcn

Boot Key: Center Key

How to Flash LYF Jio F90m:

1- Download LYF F90m Flash file which consists of File, Tool & Driver.
2- Install Driver
3- Connect Phone in off mode holding Center Key to cross-check driver installation. It will make port named “Qualcomm HS-USB Diagnostics 9091”
4- It means the driver has been installed successfully.
5- Install Flash Tool named Megafone SW Download Tool.

6- Click on Search File & assign the path of the flash file.

7- Out of four File appearing, select prog_emmc_firehose_8909_lite (2nd File)

8- Connect Phone & press Center Key as Boot key & Click on Download.
9- Phone will switch to EDL mode directly and Upgrade starts.
***Make sure no space is there in File Path.

Flashing using Flash tool:

If flashing Fails or does not start, then there must be a gap between the words while choosing flash file. Rename the folder.

As in Qualcomm Flashing, there must be no gap in between the words.

jio new should be replaced by jio_new or jionew.

Download Lava Y10 Flash File:

• Lava_Y10_MT6737M_S101_20170621
• SP Flash Tool
• MTK Driver

How to Flash Lava Y10:

Install MTK Driver.
1- Download the package & Extract SP Flash tool.
2- Out of the icon appearing, Double click on Flash_tool.exe
3- it will launch the tool on your PC, Click on Scatter-Loading appearing on the Right side of the tool.
4- Now, assign the firmware which will be in form “Android_scatter.txt”.
5- Click on Download to start flashing.
6- Switch off your Mobile and Connect it to PC by pressing Volume down or Volume up key.
7- It will lead you to Successful Flashing

Download Lava Z70 Flash File:

• LAVA_Z70_2_16_V1.0_M017_20180416
• Lava_Z70_MT6737M_V1.0_M001_20170704
• SP_MDT_Tool_W1712.00.00
• MTK Driver

How to Flash Lava Z70:

Install MTK Driver.
1- Download the package & Extract SP Flash tool.
2- Out of the icon appearing, Double click on Flash_tool.exe
3- it will launch the tool on your PC, Click on Scatter-Loading appearing on the Right side of the tool.
4- Now, assign the firmware which will be in form “Android_scatter.txt”.
5- Click on Download to start flashing.
6- Switch off your Mobile and Connect it to PC by pressing Volume down or Volume up key.
7- It will lead you to Successful Flashing

Download Micromax Q452 Flash File:

• MMX_Q452_SW_V15_HW_V1.0_07072017
• MMX_Q452_SW_V16_HW_V1.0_08042017
• SP Flash Tool
• MTK Driver

How to Flash Micromax Q452:

Install MTK Driver.
1- Download the package & Extract SP Flash tool.
2- Out of the icon appearing, Double click on Flash_tool.exe
3- it will launch the tool on your PC, Click on Scatter-Loading appearing on the Right side of the tool.
4- Now, assign the firmware which will be in form “Android_scatter.txt”.
5- Click on Download to start flashing.
6- Switch off your Mobile and Connect it to PC by pressing Volume down or Volume up key.
7- It will lead you to Successful Flashing