Samsung SM-A910F Flash File (Stock ROM)

Download Samsung SM-A910F Flash File:

• A910FXXU1CSJ1
• A910FXXU1BQL4 Latest 2017 December Update
• Odin tool
• Samsung Kies

How to Flash Samsung SM-A910F:

Make sure your device is atleast 30 percent charged to perform flashing.

• Install Samsung kies to make connectivity between Phone & Odin flash tool.
• Switch off the mobile.
• Press the Power + volume down + home button.
• Android symbol will appear, now press volume up to enter into the download mode.
• Unzip the Samsung SM-J510F Update file.
• Now open the Odin flash tool.
• Select flash file in PDA or AP.
• After selection mobile will get detected automatically and will display a message Added.
• Now click start on system & installation is in process.
• After installation mobile restart of its own.

Download Lephone W2 Flash File to flash android phone using QGDP or SPD tool:

• Lephone_W2_V11_20171208_6.0_CPB

To flash Lephone W2. First, try with v11.

In case if after flashing screen turns into White Display, then you have to flash it using v08 File.

Use QGDP Tool to Flash V11 Flash File.

• UpdCPB_EFUSE_SW43HA_lephone_PW2-H_Android6.0_SC9832_V08_20170713

If you had flashed Lephone W2 with V08 file and set has been bricked or in Dead mode. Then flash it with V11 Flash file, it will work.

Use QGDP Tool to Flash V08 Flash File.

• lephone W2 Volte V01

If you are looking for the Volte File in Lephone W2, then flash it with V01 File.

Use SPD Tool to Flash V01 Flash File.

• SPD Flash tool.
• QGDP Tool

How to Flash Lephone W2 Volte:

Install SPD Driver
1- Download the package & Extract Flash tool.
2- Out of the icon appearing, Double click on UpgradeDownload.exe.
3- It will Launch the tool on PC.
4- Click on Load Packed button & Select the Firmware with extension .pac at end.
5- Click on Downloading button which is at third position.
6- Switch off your Mobile & connect it to PC using Volume down key.
7- It will lead you to Successful flashing.

Download Sony E4i Clone MT6572 Flash File:

• Sony_E4i_Clone_MT6572_20170525_4.4.2
• SP Flash Tool
• MTK Driver

How to Flash Sony E4i Clone MT6572:

Install MTK Driver.
1- Download the package & Extract SP Flash tool.
2- Out of the icon appearing, Double click on Flash_tool.exe
3- it will launch the tool on your PC, Click on Scatter-Loading appearing on the Right side of the tool.
4- Now, assign the firmware which will be in form “Android_scatter.txt”.
5- Click on Download to start flashing.
6- Switch off your Mobile and Connect it to PC by pressing Volume down or Volume up key.
7- It will lead you to Successful Flashing

Download Karbonn K9 Smart Grand Flash File:

• Karbonn_K9_Smart_Grand_V08
• SP Flash Tool
• MTK Driver

How to Flash Karbonn K9 Smart Grand:

Install MTK Driver.
1- Download the package & Extract SP Flash tool.
2- Out of the icon appearing, Double click on Flash_tool.exe
3- it will launch the tool on your PC, Click on Scatter-Loading appearing on the Right side of the tool.
4- Now, assign the firmware which will be in form “Android_scatter.txt”.
5- Click on Download to start flashing.
6- Switch off your Mobile and Connect it to PC by pressing Volume down or Volume up key.
7- It will lead you to Successful Flashing

Download Celkon Q4G Plus (2+ 16 GB) Flash File Flash File:

• Celkon_Q4G_Plus
• SP Flash Tool
• MTK Driver

How to Flash Celkon Q4G Plus (2+ 16 GB) Flash File:

Install MTK Driver.
1- Download the package & Extract SP Flash tool.
2- Out of the icon appearing, Double click on Flash_tool.exe
3- it will launch the tool on your PC, Click on Scatter-Loading appearing on the Right side of the tool.
4- Now, assign the firmware which will be in form “Android_scatter.txt”.
5- Click on Download to start flashing.
6- Switch off your Mobile and Connect it to PC by pressing Volume down or Volume up key.
7- It will lead you to Successful Flashing

Download Karbonn K9 Smart Selfie Flash File:

• Karbonn_K9_Smart_Selfie_V07
• SP Flash Tool
• MTK Driver

How to Flash Karbonn K9 Smart Selfie:

Install MTK Driver.
1- Download the package & Extract SP Flash tool.
2- Out of the icon appearing, Double click on Flash_tool.exe
3- it will launch the tool on your PC, Click on Scatter-Loading appearing on the Right side of the tool.
4- Now, assign the firmware which will be in form “Android_scatter.txt”.
5- Click on Download to start flashing.
6- Switch off your Mobile and Connect it to PC by pressing Volume down or Volume up key.
7- It will lead you to Successful Flashing