Miracle Box with key Dongle: Installation

How to Flash A23 Tablets:-

1. Download USB driver and install it on your PC.
2. Download Phoenix USB pro and extract files on your PC. Now you can see the file Phoenix USB pro files.
3. Switch off your device.
4. Download the Stock ROM that you want to Flash on your tablet or mobile and extract it on your PC.
5. Run PhoenixUSBPro.exe file on your PC.
6. After successful launching of PhoenixUSBPro tool in your PC, click on the key button from the top and select the phoenix key file.
7. Assign the path of Firmware (.img extension) for the Tablet by Click on the image button.
8. Click on Start button to initialize OS installation.
9. If Big Green Tick mark appears on the right, it means flash file is correct & can be flashed but if Red Mark appears with Wrong symbol, then your Flash file is not correct.
10. Now connect your mobile or tablet (switched off) to your PC pressing Volume Down Key and tap on the power buttons 3 times then release the Volume Down key to boot or get easily detected by PC.
11. Flashing process will start automatically after detecting your device by PhoenixUSB Pro tool.

Download Haier Firmware & Tools (Steps to Flash)

Haier Flash file is the basic requirement while reinstallation of Firmware. However, if you are limited to stock ROM you cannot install/flash the device. You need tool to flash the device.
Most of the time flashing fails, because you forget to install Driver. As, most important process to make communication between Haier mobile, smartphones or tablet with the PC or Laptop.
Majority of Haier Gadgets are powered by –
1- MTK CPU :- MTK Driver Installation
2- SPD CPU
MTK CPU can be flashed using SP tool and you have to press Volume down as boot key while connecting to PC.
SPD CPU are flashed using SPD tool and use volume down as boot key while connecting to PC.
Mobiles should be switched off during the process of flashing.
Just Download the Stock Firmware from the page below which act as a support site, free download and for any Software related issue post your inquiry.

Samsung Android Phone (Firmware & Flashing Steps)

Samsung Flash file is the basic requirement while reinstallation of Firmware. However, if you are limited to stock ROM you cannot install/flash the device. You need tool to flash the device.
Most of the time flashing fails, because you forget to install Driver. As, most important process to make communication between Samsung mobile (phones), smartphones or tablet with the PC or Laptop.
Check Steps How to use Odin Flash tool
Phones should be switched off during the process of flashing.
Just Download the Stock Firmware for free from the Table below which act as a support site for free download for any Software related issue.
All files have the direct link as on xda you have to search for the link.
All these files are compatible with Z3X, HWK UFS box. These boxes can also be used for the installation of Android OS on phones.

Samsung Combination files are required to enable Factory mode. By enabling Factory mode, USB debugging is enabled which is required to remove FRP in the latest Samsung phones.

Download YGDP Flash Tool: 

• YGDP_Setup_V5.00: Download
• YGDP_Tool_V4.0.6: Download
• YGDP_Setup_V4.0.3: Download
• YGDP_Setup_V4.0.1: Download
• YGDP_Setup_V3.98: Download 
• YGDP_Setup_V3.97: Download
• YGDP_Setup_V3.93: Download
• YGDP_Setup_V3.83: Download
• YGDP_Setup_V3.31: Download 
• YGDP_Setup_V3.10: Download

Only Qualcomm CPU with Firmware extension .cpb can be flashed using YGDP tool.
1- Download the latest YGDP tool.
2- Install ADB driver.
3- Now, connect mobile to PC.
4- Open device manager and confirm your mobile has been identified by PC.
5- Unzip tool and run the setup.
6- When tool interface appears, enter 369 as password.
7- Click on Login to use the tool.
8- Click on Config and select CPU model.
9- Click on CPB file and assign the path of firmware.
10- Switch off Mobile, connect it to PC using USB cable.
11- Click on start.
12- Flashing starts and when completed Cell 0 will turn in to green color.