Get All Flash File
Menu

How to Root Samsung Galaxy J8 (SM-J810G)

How to Root Samsung Galaxy J8 (SM-J810G)

If you are looking to root your Samsung SM-J810G running Android version 8.0, then you can follow up the process.

Note: Rooting Voids Warranty and it works only on Android 8.0, if your phone is running a higher version of Android. Then this file will not be compatible to root Samsung SM-J810G.

Samsung SM-J810G Android 8.0: Root File 

In order to root your Samsung SM-J810G, you have to enable OEM & USB Debugging.

1- Open Setting, then choose the last option i.e. About Device.

2- Under About Device, Tap on Software Info.

3- Tap on Build no under Software Info. 8 times, it will enable developer option.

4- Tap on OEM Unlock & USB Debugging.

These conditions should be met, in order to root your Samsung SM-J810G.

1- Now, Open Odin tool which is within the Root file.

2- Select Root File under AP/PDA.

3- Connect phone in Download Mode.

4- Click on Start to Flash.

By Following the process mentioned above, you can root your SM-J810G running Android 8.0

 

Samsung SM-G615F Touch Not working After Update

Download Samsung SM-G615F Touch not Working After Update, the issue with the phone is the Copy Folder which has been used to replace the original broken folder:

This File works only on SM-G615F devices with Binary 2.

How to Flash Samsung SM-G615F:

Make sure your device is atleast 30 percent charged to perform flashing.
• Switch off the mobile
• Press the Power + volume down + home button
• Android symbol will appear, now press volume up to enter into the download mode
• Now open the Odin flash tool and follow the steps as shown in the video
• Select Samsung SM-G615F
• Select the Odin tool and open it
• Select BL file
• Click AP or PDA then select AP File
• Click CP and select Modem File.
• Click CSC and select CSC File.
• After selection mobile will get detected automatically
• Now click start on system & installation is in process
• After installation mobile switch ON of its own.

After Flashing, Open Recovery & Wipe Data/Clear cache.

Yuhu Vast Plus Flash File (Stock ROM)

Download Yuho Vast Plus Flash File:

Password: hvadsh_Repairmymobile_654456

Flashing will remove FRP within the Phone.

How to Flash Yuho Vast Plus:

Only Qualcomm CPU with Firmware extension .cpb can be flashed using QGDP tool.
1- Download the latest QGDP tool.
2- Install ADB driver.
3- Now, connect mobile to PC holding boot key.
4- Open device manager and confirm your mobile has been identified by PC.
5- Unzip tool and run the setup.
6- When tool interface appears, enter Username=admin & Pass=123456 as password.
7- Click on Login to use the tool.
8- Select Flash File & Flash.

Video Tutorial: