LePhone W7r Flash File (Stock ROM)

Download LePhone W7r Flash File:

• PW7R_Android6.0_SC9832_V07_20180615
• QGDP_Assembly_UpgradeTool
• MDT-SMT-1.1.0-0904

Flashing will remove FRP within the Phone.

How to Flash LePhone W7r:

Only Qualcomm CPU with Firmware extension .cpb can be flashed using QGDP tool.
1- Download the latest QGDP tool.
2- Install ADB driver.
3- Now, connect mobile to PC holding boot key.
4- Open device manager and confirm your mobile has been identified by PC.
5- Unzip tool and run the setup.
6- When tool interface appears, enter Username=admin & Pass=123456 as password.
7- Click on Login to use the tool.
8- Select Flash File & Flash.

Video Tutorial:

Download Itel W6003 Flash File:

• W6003-F3108-9.0-OP-V014-20190605

Flashing will remove FRP within the Phone.

• SPD Flash tool.

How to Flash Itel W6003:

Install SPD Driver
1- Download the package & Extract Flash tool.
2- Out of the icon appearing, Double click on UpgradeDownload.exe.
3- It will Launch the tool on PC.
4- Click on Load Packed button & Select the Firmware with extension .pac at end.
5- Click on Downloading button which is at third position.
6- Switch off your Mobile & connect it to PC using Volume down key.
7- It will lead you to Successful flashing.

Download Itel W5008 Flash File:

• W5008-SA332-8.1-OP-V006-20190528

Flashing will remove FRP within the Phone.

• SPD Flash tool.

How to Flash Itel W5008:

Install SPD Driver
1- Download the package & Extract Flash tool.
2- Out of the icon appearing, Double click on UpgradeDownload.exe.
3- It will Launch the tool on PC.
4- Click on Load Packed button & Select the Firmware with extension .pac at end.
5- Click on Downloading button which is at third position.
6- Switch off your Mobile & connect it to PC using Volume down key.
7- It will lead you to Successful flashing.

Download Itel W4003 Flash File:

• W4003-SA217-8.1-OP-V021-20190521

Flashing will remove FRP within the Phone.

• SPD Flash tool.

How to Flash Itel W4003:

Install SPD Driver
1- Download the package & Extract Flash tool.
2- Out of the icon appearing, Double click on UpgradeDownload.exe.
3- It will Launch the tool on PC.
4- Click on Load Packed button & Select the Firmware with extension .pac at end.
5- Click on Downloading button which is at third position.
6- Switch off your Mobile & connect it to PC using Volume down key.
7- It will lead you to Successful flashing.

Download Itel IT1503 Flash File:

• IT1503-V160-20151209

Flashing will remove FRP within the Phone.

• SPD Flash tool.

How to Flash Itel IT1503:

Install SPD Driver
1- Download the package & Extract Flash tool.
2- Out of the icon appearing, Double click on UpgradeDownload.exe.
3- It will Launch the tool on PC.
4- Click on Load Packed button & Select the Firmware with extension .pac at end.
5- Click on Downloading button which is at third position.
6- Switch off your Mobile & connect it to PC using Volume down key.
7- It will lead you to Successful flashing.

Download Samsung A50 SM-A505F Flash File:

• A505FDDU9CVG2
• A505FDDS9CVA4
• A505FDDS9CUJ2
• A505FDDS9CUI5
• A505FDDS9CUH3
• A505FDDU8CUE5
• A505FOJM8CUE2
• A505FDDU7CUD4
• A505FDDS5BTK3
• A505FDDU4BTC4
• SM-A505FDDU2ASH3
• SM-A505F_A505FDDU1ASD6 | April 2019
• Odin tool
• Samsung Kies

How to Flash Samsung A50 SM-A505F:

Make sure your device is atleast 30 percent charged to perform flashing.
• Switch off the mobile
• Press the Power + volume UP. Phone will enter in Recovery mode then select Reboot to Bootloader by pressing Power Key.
• Phone will turn into Download Mode.
• Now open the Odin flash tool and follow the steps as shown in the video
• Select Samsung SM-A505F
• Select the Odin tool and open it
• Select BL file
• Click AP or PDA then select AP File
• Click CP and select Modem File.
• Click CSC and select CSC File.
• After selection mobile will get detected automatically
• Now click start on system & installation is in process
• After installation mobile switch ON of its own.