Samsung SM-A260G Flash File (Stock ROM)

Download Samsung SM-A260G Flash File:

• A260GDDSCAUJ1
• A260GDDSBAUF1
• A260GDDSAAUD1
• A260GDDS9AUB3
• A260GDDS8ATK1
• A260GDDS7ATH1
• A260GDDS6ATD2
• A260GDDU4ATA7
• A260GDDU3ASJ1 | Oct 2019
• SM-A260G_A260GDDU1ASD7_INS | April 2019
• Odin tool
• Samsung Kies

How to Flash Samsung SM-A260G:

Make sure your device is atleast 30 percent charged to perform flashing.
• Switch off the mobile
• Press the Power + volume UP. Phone will enter in Recovery mode then select Reboot to Bootloader by pressing Power Key.
• Phone will turn into Download Mode.
• Now open the Odin flash tool and follow the steps as shown in the video
• Select Samsung SM-A260G
• Select the Odin tool and open it
• Select BL file
• Click AP or PDA then select AP File
• Click CP and select Modem File.
• Click CSC and select CSC File.
• After selection mobile will get detected automatically
• Now click start on system & installation is in process
• After installation mobile switch ON of its own.

Flashing Tecno SA3 with flash tool will remove frp Lock in phone.

Download Tecno SA3 Flash File:

• SA3-H8016V-OGo-TG-LC-190529V21
• Tecno Flash Tool
• MTK Driver

How to Flash Tecno SA3:

Install MTK Driver
1- Download the package & Extract Flash tool.
2- Out of the icon appearing, Double click on Techno Flash Tool
3- it will launch the tool on your PC, Under Operation Area select second one i.e. Setting.
4- Now, assign the firmware which will be in form “Android_scatter.txt”.
5- Click on Play to start flashing.
6- Switch off your Mobile and Connect it to PC by pressing Volume down or Volume up key.
7- It will lead you to Successful Flashing

All files are in premium section, purchase premium first (सभी फ़ाइलें प्रीमियम अनुभाग में हैं, पहले प्रीमियम खरीदें)

Download Itel A16 Plus SA332Q Flash File:

• iTel-A16-Plus-SA332Q-10-OP-V027-20230218-Flash-File-RMM
• A16Plus-SA332Q-10-OP-V026-20221226 (Android-10)
• A16-PLUS-SA332-8.1-OP-V041-20210608 (Android-8.1)
• A16Plus-SA332-8.1-OP-V038-20200803
• A16Plus-SA332Q-10-OP-V022-20220704
• A16Plus-SA332-8.1-OP-V021-20190415

Flashing will remove FRP within the Phone.

• UPGRADEDOWNLOAD_R21.0.0001

How to Flash Itel A16 Plus SA332Q:

Install SPD Driver
1- Download the package & Extract Flash tool.
2- Out of the icon appearing, Double click on UpgradeDownload.exe.
3- It will Launch the tool on PC.
4- Click on Load Packed button & Select the Firmware with extension .pac at end.
5- Click on Downloading button which is at third position.
6- Switch off your Mobile & connect it to PC using Volume down key.
7- It will lead you to Successful flashing.

Download Masstel M401 Flash File:

• Masstel_M401_MT6572_150203_215730
• SP Flash Tool
• MTK Driver

How to Flash Masstel M401:

Install MTK Driver.
1- Download the package & Extract SP Flash tool.
2- Out of the icon appearing, Double click on Flash_tool.exe
3- it will launch the tool on your PC, Click on Scatter-Loading appearing on the Right side of the tool.
4- Now, assign the firmware which will be in form “Android_scatter.txt”.
5- Click on Download to start flashing.
6- Switch off your Mobile and Connect it to PC by pressing Volume down & Volume up keys if it fails then connect without pressing any key in off mode.
7- It will lead you to Successful Flashing

Download Masstel M421 Flash File:

• Masstel_M421_150203_214016
• SP Flash Tool
• MTK Driver

How to Flash Masstel M421:

Install MTK Driver.
1- Download the package & Extract SP Flash tool.
2- Out of the icon appearing, Double click on Flash_tool.exe
3- it will launch the tool on your PC, Click on Scatter-Loading appearing on the Right side of the tool.
4- Now, assign the firmware which will be in form “Android_scatter.txt”.
5- Click on Download to start flashing.
6- Switch off your Mobile and Connect it to PC by pressing Volume down & Volume up keys if it fails then connect without pressing any key in off mode.
7- It will lead you to Successful Flashing

Download Masstel M330 Flash File:

• Masstel_M330
• SP Flash Tool
• MTK Driver

How to Flash Masstel M330:

Install MTK Driver.
1- Download the package & Extract SP Flash tool.
2- Out of the icon appearing, Double click on Flash_tool.exe
3- it will launch the tool on your PC, Click on Scatter-Loading appearing on the Right side of the tool.
4- Now, assign the firmware which will be in form “Android_scatter.txt”.
5- Click on Download to start flashing.
6- Switch off your Mobile and Connect it to PC by pressing Volume down & Volume up keys if it fails then connect without pressing any key in off mode.
7- It will lead you to Successful Flashing