Get All Flash File
Menu

Poco X2 Flash File (Stock ROM)

Poco X2 Flash File (Stock ROM)

Download Poco X2 Flash File:

Poco-X2-edl-Point

How to Flash Poco X2:

Download Poco X2 Flash File
1- Connect phone through USB cable to PC and unplug battery.
2- Short Test Point and connect battery.
3- Under Device Manger, port of Qualcomm HS USB QLoader 9008 port will appear.
4- Download & run MI Flash Tool
5- Place the Flash File on Desktop.
6- Assign the Folder path.
7- Click on refresh & then tap Flash button.

How to Enable Diag mode in Jio Phone

If you are looking to enable Diag. port in Jio Qualcomm Keypad phones by flashing the latest flash file.

Then this process no longer works.

Earlier by flashing, Diag. port get enabled.

Note: You can buy Jio Battery with 3 Month Warranty at Minimum price as compared to the Market or Online rate.

We will guide you throughout the process which must be used to enable Diag. port in the latest Qualcomm Keypad Phones.

We had used F220b as an example which is powered by a Qualcomm processor.

1- First, replace the Loader file of new File to the old File.

2- Loader File for Jio F220b is under folder Boot_images > Build > ms > bin > 8909 > emmc

3- Copy all files from EMMC of the Latest File to the Old File.


Then use, the Old file to flash Jio F220b.

F220b can be flashed using either Qfil or Qflash.

All Jio Keypad File can be Found at RepairMyMobile.

Process of flashing will be the same. It will enable Diag. port in the phone.

Tecno CD8 Flash File (Stock ROM)

Download Tecno CD8 Flash File:

How to Flash Tecno CD8:

Install MTK Driver.
1- Download the package & Extract SP Flash tool.
2- Out of the icon appearing, Double click on Flash_tool.exe
3- it will launch the tool on your PC, Click on Scatter-Loading appearing on the Right side of the tool.
4- Now, assign the firmware which will be in form “Android_scatter.txt”.
5- Click on Download to start flashing.
6- Switch off your Mobile and Connect it to PC by pressing Volume down or Volume up key.
7- It will lead you to Successful Flashing

Tecno Camon 12 Pro CC9 Flash File (Stock ROM)

Download Tecno CC9 Flash File:

How to Flash Tecno CC9:

Install MTK Driver.
1- Download the package & Extract SP Flash tool.
2- Out of the icon appearing, Double click on Flash_tool.exe
3- it will launch the tool on your PC, Click on Scatter-Loading appearing on the Right side of the tool.
4- Now, assign the firmware which will be in form “Android_scatter.txt”.
5- Click on Download to start flashing.
6- Switch off your Mobile and Connect it to PC by pressing Volume down or Volume up key.
7- It will lead you to Successful Flashing

QFIL Tool Download (All version): How to Use Guide

All files are in premium section, purchase premium first (सभी फ़ाइलें प्रीमियम अनुभाग में हैं, पहले प्रीमियम खरीदें)

QFIL tool can be used to flash most of the device powered by Qualcomm Chipset.

Files with .mbn & Content.xml can be flashed using QFIL.

QFIL tool Download:

If QFIL tool output an error “Download Fail Firehorse Fail FHLoader Fail Process Fail“, then use QPST tool_v2.7.496

Note: First & Foremost step is to install Qualcomm USB driver. 

How to Use QFIL Tool:

1- Download Stock ROM & unzip. Check if the extension of the file is in either .mbn or content.xml format.

2- if it is, then download the Qfil tool & Install.

To Flash .MBN File:

3- Select Flat Build then click on Programmer Path and select Program file with .mbn extension.

4- Click on Load XML & Select Raw Program file. After selection of Raw Program, you have to select Patch File.

5- Connect Phone Holding Boot key. The section which is on the top of the tool display “No Port Available” will Show Qualcomm USB Port.

6- Click on Download to start Flashing.

To Flash Contents.XML File:

3- Select Meta Build & Click on Programmer path and select file with .mbn extension.

4- Click on Load Content & Select Content.xml File.

5- Connect Phone Holding Boot key. The section which is on the top of the tool display “No Port Available” will Show Qualcomm USB Port.

6- Click on Download Content to start Flashing.

Samsung SM-J610F U4 & U5 Touch File: (Working)

If your Samsung J610F phone has copy touch and you had updated the latest Security Patch then it will not respond.

Note: 1- FRP must be Off.

2- Enable OEM.

Binary 5 Touch File: Download

Binary 4 Touch File: Download

Odin Tool: Download 

1- Put the phone in Download mode using Power + Volume Down + menu then Tap once Volume UP to enter download mode.

2- Download the file & select Zip file in AP or PDA, CP, BL and HOME CSC.

3- Click on Start. After flashing gets completed plus out battery.

4- Hard reset using Power + Volume UP+ Menu.

Then Reboot the phone.

Touch will start to respond.