Lenovo K10 XT2025-3 Flash File (Stock ROM)

Download Lenovo K10 XT2025-3 Flash File:

• (XT2025-3-DS)+(PAGX0006SG)
• SP Flash Tool
• MTK Driver

***Try Firmware Upgrade or Untick Preloader Then Flash

How to Flash Lenovo K10 XT2025-3:

Install MTK Driver.
1- Download the package & Extract SP Flash tool.
2- Out of the icon appearing, Double click on Flash_tool.exe
3- it will launch the tool on your PC, Click on Scatter-Loading appearing on the Right side of the tool.
4- Now, assign the firmware which will be in form “Android_scatter.txt”.
5- Click on Download to start flashing.
6- Switch off your Mobile and Connect it to PC by pressing Volume down or Volume up key.
7- It will lead you to Successful Flashing

Download SM-G615F Pattern Unlock without Data Loss:

• G615FXXU2BRL3  (Works Only on Binary 2)
• Odin tool
• Samsung Kies

How to Flash Samsung SM-G615F:

Make sure your device is atleast 30 percent charged to perform flashing.

• Install Samsung kies to make connectivity between Phone & Odin flash tool.
• Switch off the mobile.
• Press the Power + volume down + home button.
• Android symbol will appear, now press volume up to enter into the download mode.
• Unzip the SM-G615F file.
• Now open the Odin flash tool.
• Select flash file in PDA or AP.
• After selection mobile will get detected automatically and will display a message Added.
• Now click start on system & installation is in process.
• After installation mobile restart of its own.

Download LYF Jio F320B Flash File to install KAIOS OS on your phone.

• LYF-F320B-002-02-58-140422 (latest)
• LYF-F320B-002-02-56-250322
• LYF-F320B-002-02-49-301121  
• LYF-F320B-002-02-37-130921 
• LYF-F320B-002-01-83-131020 
• QFlash Tool

Boot Key: ‘*’

Note: Steps to Enable Diag Port in Jio Phones

How to Flash LYF Jio F320B:

1- Download LYF Jio F320B Flash file which consists of File, tool & Driver.
2- Install Driver
3- Connect Phone holding Boot key: * mode to cross-check driver installation. It will make port named “Qualcomm HS-USB Diagnostics 9008”.
4- It means the driver has been installed successfully.
5- Install Flash Tool, which will install a shortcut on Desktop named Qflash_Tool_9.1.7.

6- Connect phone (Press * as Boot key)& Click on Load Content and from Flash File Folder select Content.xml

7- It will show Port in tool.
8- Click on Download Content to start Upgrading.

9- Wait till done appears.
10- After upgradation, device will shift to download mode.
11- Disconnect Phone & reinsert battery.

If flashing Fails or does not start, then there must be a gap between the words while choosing flash file. Rename the folder.

As in Qualcomm Flashing, there must be no gap in between the words.

jio new should be replaced by jio_new or jionew.

 

Most of the Xiaomi Phones after resetting Mi Account get relock when connected to Internet.

We will use UMT to get rid of Mi Phone getting Relocked.

Solution: Mi Account Relock after connecting Internet;

1- Run UMT QC Fire (Latest).

2- Then Reset Mi Account of the phone.

3- Phone will reboot, When Menu appears in the phone.

4- Make sure to not insert sim & no internet connectivity to the device.

5- Go to Setting, Tap 7 times on Build version. It will enable the developer mode.

6- Now in Power on mode. Connect phone to the PC. Make sure to install Fastboot driver on pc for further operation.

7- Using Umt Qc fire, now click on Anti-relock tab.

This will reset the Relock of the device.

Now, you can insert SIM & connect phone to the internet.

 

Download Samsung Galaxy M01 Core SM-M013F Flash File and use Odin tool to flash:

• M013FDDU7AWA1
• M013FDDS6AVA2
• M013FDDU5AUJ2
• M013FDDU4AUG1
• M013FDDU3AUD2
• M013FDDU1ATI3
• Odin tool
• Samsung Kies

How to Flash Samsung Galaxy M01 Core SM-M013F:

Make sure your device is atleast 30 percent charged to perform flashing.

• Install Samsung kies to make connectivity between Phone & Odin flash tool.
• Switch off the mobile.
• Press the Power + volume down + home button.
• Android symbol will appear, now press volume up to enter into the download mode.
• Unzip the Samsung Galaxy M01 Core SM-M013F file.
• Now open the Odin flash tool.
• Select flash file in PDA or AP.
• After selection mobile will get detected automatically and will display a message Added.
• Now click start on system & installation is in process.
• After installation mobile restart of its own.