Get All Flash File
Menu
You are here: Home / Archives for Android Flash File Database

Android Flash File Database

LYF Jio F120B Working Flash File (Stock ROM)

Download LYF JIO F120B Flash File to install KAIOS OS on your phone.

Note: Steps to Enable Diag Port in Jio Phones

LYF JIO F120B Flash Tool

How to Flash LYF JIO F120B:

1- Download LYF F120B Flash file which consist of File, tool & Driver.
2- Install Driver
3- Connect Phone holding * & # key mode to cross check driver installation. It will make port named “Qualcomm HS-USB Diagnostics 9008”
4- It means driver has been installed successfully.
5- Install Flash Tool, which will install shortcut on Desktop named QFLASH Tool.


6- Click on Load Content and from Flash File Folder select Content.xml

7- Connect phone (Press * & # as Boot key) & It will show Port in tool.
8- Click on Download Content to start Upgrading.
9- Wait till done appears.
10- After upgradation, device will shift to download mode.
11- Disconnect Phone & reinsert battery.

If flashing Fails or does not start, then there must be a gap between the words while choosing flash file. Rename the folder.

As in Qualcomm Flashing, there must be no gap in between the words.

jio new should be replaced by jio_new or jionew.

LYF Jio F10Q Working Flash File (Stock ROM)

Download LYF JIO F10q Flash File to install KAIOS OS on your phone.

Note: Steps to Enable Diag Port in Jio Phones

LYF F10Q Flash file

How to Flash LYF Jio F10Q:

1- Download LYF F10Q Flash file which consist of File, tool & Driver.
2- Install Driver
3- Connect Phone in ON mode to cross check driver installation. It will make port named “Qualcomm HS-USB Diagnostics 9008”
4- It means driver has been installed successfully.
5- Run qcMUP.
6- Click on Upgrade and then on Load SW
7- Assign the path of the Flash File.
8- Switch off Phone.
9- Press & Hold Power + UP-DPad key to put phone into download mode. (Phone will Vibrate for a second, Display will blink & Phone goes off, it indicates that the phone is in download mode.)
10- Or you can Hold UP-DPad and connect the phone through USB
11- Flashing Starts.

Intex Aqua Wave Stock ROM (Flash File)

Download Intex Aqua Wave Flash File:

How to Flash Intex Aqua Wave:

Install SPD Driver
1- Download the package & Extract Flash tool.
2- Out of the icon appearing, Double click on UpgradeDownload.exe.
3- It will Launch the tool on PC.
4- Click on Load Packed button & Select the Firmware with extension .pac at end.
5- Click on Downloading button which is at third position.
6- Switch off your Mobile & connect it to PC using Volume down key.
7- It will lead you to Successful flashing.

Intex Aqua Marvel Stock Rom (Flash File)

Download Intex Aqua Marvel Flash File:

How to Flash Intex Aqua Marvel:

Install MTK Driver.
1- Download the package & Extract SP Flash tool.
2- Out of the icon appearing, Double click on Flash_tool.exe
3- it will launch the tool on your PC, Click on Scatter-Loading appearing on the Right side of the tool.
4- Now, assign the firmware which will be in form “Android_scatter.txt”.
5- Click on Download to start flashing.
6- Switch off your Mobile and Connect it to PC by pressing Volume down or Volume up key.
7- It will lead you to Successful Flashing

Intex Aqua Shine 4G Stock ROM (Firmware)

Download Intex Aqua Shine 4G Flash File:

How to Flash Intex Aqua Shine 4G:

Install MTK Driver.
1- Download the package & Extract SP Flash tool.
2- Out of the icon appearing, Double click on Flash_tool.exe
3- it will launch the tool on your PC, Click on Scatter-Loading appearing on the Right side of the tool.
4- Now, assign the firmware which will be in form “Android_scatter.txt”.
5- Click on Download to start flashing.
6- Switch off your Mobile and Connect it to PC by pressing Volume down or Volume up key.
7- It will lead you to Successful Flashing

Gionee F103 Pro Stock Rom (Firmware)

Download Gionee F103 Pro Flash File:

To flash Gionee F103 pro, prefer T6524 version.

How to Flash Gionee F103 Pro:

Install MTK Driver.
1- Download the package & Extract SP Flash tool.
2- Out of the icon appearing, Double click on Flash_tool.exe
3- it will launch the tool on your PC, Click on Scatter-Loading appearing on the Right side of the tool.
4- Now, assign the firmware which will be in form “Android_scatter.txt”.
5- Click on Download to start flashing.
6- Switch off your Mobile and Connect it to PC by pressing Volume down or Volume up key.
7- It will lead you to Successful Flashing