Download Tenor 10.or G Flash File:
1- Download 10.or G Flash file
2- Download tool.
3- Install Qualcomm driver & Connect phone by shorting test point.
4- Run Ets.Startrun tool.
5- Click on SET, it will display Config & Setting. Click on Change Path & assign path of firmware.
6- Click on USB & Check Port no which has Qualcomm 9008 port.
7- Click again on SET & under port setting Select Port No.
8- Click on Start All to start flashing.
Download Tenor 10.or E Flash File:
1- Download 10.or E Flash file
2- Download tool.
3- Install Qualcomm driver & Connect phone by shorting test point.
4- Run Ets.Startrun tool.
5- Click on SET, it will display Config & Setting. Click on Change Path & assign path of firmware.
6- Click on USB & Check Port no which has Qualcomm 9008 port.
7- Click again on SET & under port setting Select Port No.
8- Click on Start All to start flashing.
Download LePhone Official Flash File with Flashing instruction. All firmware can be used to flash and all are official Stock ROM.
In Case, if your lephone brand is missing. Let us know in the comment.
Lephone Flash File (Stock ROM):
| LePhone | Flash File |
| LePhone W8 | Download |
| LePhone TD8208 | Download |
| LePhone W7 | Download |
| LePhone W2 | Download |
| LePhone C01 | Download |
| LePhone 2918 | Download |
| LePhone C05 | Download |
| LePhone TD9268 | Download |
| LePhone W5 | Download |
| LePhone W12 | Download |
| LePhone W11 | Download |
| LePhone W9 | Download |
| LePhone W10 | Download |
| LePhone W15 | Download |
| LePhone W21 | Download |
Download Samsung SM-J730GM Touch Not Working Flash File:
How to flash Binary 6 Flash File:
If after FRP or Updating SM-J730GM touch fails to respond, then flashing with File listed at RepairMyMobile will solve the touch issue.
After Flash with this file, you had to Hard reset the phone.
When Phone get on, touch will start to respond but Volte would be missing.
To enable Volte in SM-J730GM Flash this file using odin. It will enable Volte features.
Make sure your device is atleast 30 percent charged to perform flashing.
• Switch off the mobile
• Press the Power + volume down + home button
• Android symbol will appear, now press volume up to enter into the download mode
• Now open the Odin flash tool and follow the steps as shown in the video
• Select Samsung SM-J730GM
• Select the Odin tool and open it
• Click AP or PDA then select AP File
• After selection mobile will get detected automatically
• Now click start on system & installation is in process
• After installation mobile switch ON of its own.
Download Oppo Realme C1 RMX1811 Flash File:
Download Oppo Realme C1 RMX1811 Flash file
1- Download the Firmware package & run Flash tool.
2- Out of the icon appearing, Double click on MSM Download Tool.
3- it will launch the tool on your PC, Click on Start All.
4- Then it will verify for PC Memory Checksum.
5- Switch off your Mobile and Connect it to PC by pressing Volume down and Volume up key.
6- It will lead you to Successful Flashing.
Download Oppo A83 CPH1827 Flash File:
This file is for Oppo A83 CPH1827 with 2 GB RAM.
This file is for Oppo A83 CPH1827 with 3 GB/ 4 GB RAM.
Mobile Driver: Download
Boot Key: Volume UP + Down
Note: Tool Requires Login credential to Flash.
Download Oppo A83 CPH1827 Flash file
1- Download the Firmware package & run Flash tool.
2- Out of the icon appearing, Double click on MSM Download Tool.
3- it will launch the tool on your PC, Click on Start All.
4- Then it will verify for PC Memory Checksum.
5- Switch off your Mobile and Connect it to PC by pressing Volume down and Volume up key.
6- It will lead you to Successful Flashing.
