Get All Flash File
Menu
You are here: Home / Archives for Android Flash File Database

Android Flash File Database

Jio F320B Flash File (Stock ROM)

Leave a Comment

Download LYF Jio F320B Flash File to install KAIOS OS on your phone.

Boot Key: ‘*’

When to Flash Jio F320b:

  • Jio F320B Stuck at Logo on Booting.
  • Auto Restart
  • Dead after update
  • Hang issue
  • Software Corrupt
  • Forget Lock

This firmware has been tested by Repair My Mobile technicians during software repair and dead boot recovery.

Note: Steps to Enable Diag Port in Jio Phones

How to Flash LYF Jio F320B:

1- Download LYF Jio F320B Flash file which consists of File, tool & Driver.
2- Install Driver
3- Connect Phone holding Boot key: * mode to cross-check driver installation. It will make port named “Qualcomm HS-USB Diagnostics 9008”.
4- It means the driver has been installed successfully.
5- Install Flash Tool, which will install a shortcut on Desktop named Qflash_Tool_9.1.7.

6- Connect phone (Press * as Boot key)& Click on Load Content and from Flash File Folder select Content.xml


7- It will show Port in tool.
8- Click on Download Content to start Upgrading.


9- Wait till done appears.
10- After upgradation, device will shift to download mode.
11- Disconnect Phone & reinsert battery.

If flashing Fails or does not start, then there must be a gap between the words while choosing flash file. Rename the folder.

As in Qualcomm Flashing, there must be no gap in between the words.

jio new should be replaced by jio_new or jionew.

 

Xiaomi Anti Relock Solution: Solved

Leave a Comment

Most of the Xiaomi Phones after resetting Mi Account get relock when connected to Internet.

We will use UMT to get rid of Mi Phone getting Relocked.

Solution: Mi Account Relock after connecting Internet;

1- Run UMT QC Fire (Latest).

2- Then Reset Mi Account of the phone.

3- Phone will reboot, When Menu appears in the phone.

4- Make sure to not insert sim & no internet connectivity to the device.

5- Go to Setting, Tap 7 times on Build version. It will enable the developer mode.

6- Now in Power on mode. Connect phone to the PC. Make sure to install Fastboot driver on pc for further operation.

7- Using Umt Qc fire, now click on Anti-relock tab.

This will reset the Relock of the device.

Now, you can insert SIM & connect phone to the internet.

 

Samsung Galaxy M01 Core SM-M013F Flash File (Stock ROM)

Download Samsung Galaxy M01 Core SM-M013F Flash File and use Odin tool to flash:

How to Flash Samsung Galaxy M01 Core SM-M013F:

Make sure your device is atleast 30 percent charged to perform flashing.

  • Install Samsung kies to make connectivity between Phone & Odin flash tool.
  • Switch off the mobile.
  • Press the Power + volume down + home button.
  • Android symbol will appear, now press volume up to enter into the download mode.
  • Unzip the Samsung Galaxy M01 Core SM-M013F file.
  • Now open the Odin flash tool.
  • Select flash file in PDA or AP.
  • After selection mobile will get detected automatically and will display a message Added.
  • Now click start on system & installation is in process.
  • After installation mobile restart of its own.

Realme X3 Superzoom RMX2085 Flash File (Stock ROM)

Download Realme X3 Superzoom RMX2085 Flash File:

How to Flash Realme X3 Superzoom RMX2085:

Download Realme X3 Superzoom RMX2085 Flash file
1- Download the Firmware package & run Flash tool.
2- Out of the icon appearing, Double click on MSM Download Tool.
3- it will launch the tool on your PC, Click on Start All.
4- Then it will verify for PC Memory Checksum.
5- Switch off your Mobile and Connect it to PC by pressing Volume down and Volume up key.
6- It will lead you to Successful Flashing.

Realme X3 RMX2081 Flash File (Stock ROM)

Download Realme X3 RMX2081 Flash File:

How to Flash Realme X3 RMX2081:

Download Realme X3 RMX2081 Flash file
1- Download the Firmware package & run Flash tool.
2- Out of the icon appearing, Double click on MSM Download Tool.
3- it will launch the tool on your PC, Click on Start All.
4- Then it will verify for PC Memory Checksum.
5- Switch off your Mobile and Connect it to PC by pressing Volume down and Volume up key.
6- It will lead you to Successful Flashing.

OnePlus 7T Flash File (Stock ROM)

Download OnePlus 7T Flash File:

How to Flash OnePlus 7T:

1- Install Qualcomm Driver.
2- Make sure your device getting identified in device manager as Qualcomm HS-USB Diagnostic 9008.
3- Use both Volume as boot key.
4- Run MSM Download tool.
5- Click on verify, if it display message ok then you are ready to go.
6- Click on start to Flash.
7- Download Progress will be displayed.
8- When completed, Download complete will be displayed.