Realme C25s RMX3197 EMMC Dump File used to boot repair dead phone & can be flashed using any of the Boot repair Box.
To learn more about Boot Repairing, you can join our Training Program:
Download Xiaomi MIX Flip Flash File:
WhatsApp for Mi Account: 893-593-9022
Note: You will need Authorized tool to Flash and Remove Mi Account from Xiaomi MIX Flip.
Download Xiaomi MIX Flip Flash File
1- Connect phone through USB cable to PC and unplug battery.
2- Short Test Point and connect battery.
3- Under Device Manger, port of Qualcomm HS USB QDLoader 9008 port will appear.
4- Download & run MI Flash Tool
5- Place the Flash File on Desktop.
6- Assign the Folder path.
7- Click on refresh & then tap Flash button.
Download Realme C35 RMX3511 FRP File:
Install SPD Driver
1- Download the package & Extract Realme C35 RMX3511 FRP File and Flash tool.
2- Out of the icon appearing, Double click on UpgradeDownload.exe.
3- It will Launch the tool on PC.
4- Click on Load Packed button & Select the Firmware with extension .Pac at end.
5- Click on Downloading button which is at third position.
6- Switch off your Mobile & connect it to PC using Volume down key.
7- It will lead you to Successful flashing.
Download Vivo iQOO Z9 Lite 5G PD2357F Flash File:
Note: PD2357F are same in Vivo T3 Lite, Y28E, Y28S & iQOO Z9 Lite 5G are same.
Install MTK Driver.
1- Download the package & Extract SP Flash tool.
2- Out of the icon appearing, Double click on Flash_tool.exe
3- it will launch the tool on your PC, Click on Scatter-Loading appearing on the Right side of the tool.
4- Now, assign the firmware which will be in form “Android_scatter.txt”.
5- Click on Download to start flashing.
6- Switch off your Mobile and Connect it to PC by pressing Volume down or Volume up key if it fails then connect without pressing any key in off mode.
7- It will lead you to Successful Flashing.
Download Samsung Galaxy S23 FE SM-S711B Flash File:
Make sure your device is atleast 30 percent charged to perform flashing.
• Switch off the mobile
• Press the Power + volume down + home button
• Android symbol will appear, now press volume up to enter into the download mode
• Now open the Odin flash tool and follow the steps as shown in the video
• Select Samsung Galaxy S23 FE SM-S711B.
• Select the Odin tool and open it
• Select BL file
• Click AP or PDA then select AP File
• Click CP and select Modem File.
• Click CSC and select CSC File.
• After selection mobile will get detected automatically
• Now click start on system & installation is in process
• After installation mobile switch ON of its own.
