Android Flash File Database

Micromax Flash file is the basic requirement while re-installation of Firmware. However, if you are limited to Firmware or stock ROM you cannot install/flash the device. You need tool to flash the device.
Most of the time flashing fails, because you forget to install Driver. As, most important process to make communication between Micromax mobile, smartphones or tablet with the PC or Laptop.

Summary:  
1- How to Identify tool for any Micromax Phone (Rmm Method)
2- How to Install Driver
3- How to flash Micromax phone
4- Micromax Flash File (Stock ROM)

1- How to Identify tool for any Micromax Phone (Rmm Method)

If you had flash file but still not clear about flash tool then this guide will you give you insight about the tools.

Steps:

1- Switch off Phone and hold both Volume keys to connect.

2- Now Right Click on MY Computer and click on Manage then Open Device Manager or Search Device Manager in Start.

3- If it Display MTK device then it can be flashed using SP Flash Tool.

4- If it Display SPD device then it can be flashed using SPD tool.

5- If it Display Qualcomm device then it can be flashed using QPST tool.

2- How to Install Driver

If driver has not been installed then the connectivity between the phone & tool can’t be made.

To execute flashing driver must be installed.

We had provided .exe files for all type of phones which can be installed automatically.

To Download & install All Drivers: Download

3- How to flash Micromax phone

Majority of Micromax Gadgets are powered by –
1- MTK CPU :- SP Flash Tool
2- SPD CPU :- :- SPD Flash Tool
3- Qualcomm CPU: QPST Tool

MTK CPU can be flashed using SP Flash tool and you have to press both Volume key as boot key while connecting to PC.
SPD CPU are flashed using Upgrade Download tool and use volume down as boot key while connecting to PC.
Qualcomm based cpu can be flashed using QPST tool and phone has to be connected by holding both Volume keys.

Note: While Flashing Qualcomm phone, make sure to place firmware in Local Disk: C. 

Mobiles should be switched off during the process of flashing.
Just Download the Stock Firmware from the page below which act as a support site for free download for any Software related issue. It contain flash file, Flash tool & driver packages.

If XDA and GSM Forum does not have the file, then you can comment below. We will get the Micromax Original Flash file listed.

4- Micromax Flash File (Stock ROM):

Download LePhone W21 Flash File:

• lephone_W21
• QGDP_Assembly_UpgradeTool_v3.1.8

How to Flash Lephone W21:

Only Qualcomm CPU with Firmware extension .cpb can be flashed using QGDP tool.
1- Download the latest QGDP tool.
2- Install ADB driver.
3- Now, connect mobile to PC.
4- Open device manager and confirm your mobile has been identified by PC.
5- Unzip tool and run the setup.
6- When tool interface appears, enter ase as password.
7- Click on Login to use the tool.
8- Click on Config and select CPU model.
9- Click on CPB file and assign the path of firmware.
10- Switch off Mobile, connect it to PC using USB cable.
11- Click on start.
12- Flashing starts and when completed Cell 0 will turn in to green color.

Video Tutorial: