Android Flash File Database

Samsung Android Phone (Firmware & Flashing Steps)

Samsung Flash file is the basic requirement while reinstallation of Firmware. However, if you are limited to stock ROM you cannot install/flash the device. You need tool to flash the device.
Most of the time flashing fails, because you forget to install Driver. As, most important process to make communication between Samsung mobile (phones), smartphones or tablet with the PC or Laptop.
Check Steps How to use Odin Flash tool
Phones should be switched off during the process of flashing.
Just Download the Stock Firmware for free from the Table below which act as a support site for free download for any Software related issue.
All files have the direct link as on xda you have to search for the link.
All these files are compatible with Z3X, HWK UFS box. These boxes can also be used for the installation of Android OS on phones.

Samsung Combination files are required to enable Factory mode. By enabling Factory mode, USB debugging is enabled which is required to remove FRP in the latest Samsung phones.

Download YGDP Flash Tool: 

• YGDP_Setup_V5.00: Download
• YGDP_Tool_V4.0.6: Download
• YGDP_Setup_V4.0.3: Download
• YGDP_Setup_V4.0.1: Download
• YGDP_Setup_V3.98: Download 
• YGDP_Setup_V3.97: Download
• YGDP_Setup_V3.93: Download
• YGDP_Setup_V3.83: Download
• YGDP_Setup_V3.31: Download 
• YGDP_Setup_V3.10: Download

Only Qualcomm CPU with Firmware extension .cpb can be flashed using YGDP tool.
1- Download the latest YGDP tool.
2- Install ADB driver.
3- Now, connect mobile to PC.
4- Open device manager and confirm your mobile has been identified by PC.
5- Unzip tool and run the setup.
6- When tool interface appears, enter 369 as password.
7- Click on Login to use the tool.
8- Click on Config and select CPU model.
9- Click on CPB file and assign the path of firmware.
10- Switch off Mobile, connect it to PC using USB cable.
11- Click on start.
12- Flashing starts and when completed Cell 0 will turn in to green color.

Download Micromax A311 Flash File:

• 4.4.012.P1.141110.8297W_I02
• Micromax A311 Scatter File
• YGDP tool (v3.98)

How to Flash Micromax A311:

1- Download the latest YGDP tool (v3.98).
2- Install ADB driver.
3- Now, connect mobile to PC.
4- Open device manager and confirm your mobile has been identified by PC.
5- Unzip tool and run the setup.
6- When tool interface appears, enter 369 as password.
7- Click on Login to use the tool.
8- Click on Config and select CPU model.
9- Click on CPB file and assign the path of firmware.
10- Switch off Mobile, connect it to PC using USB cable.
11- Click on start.
12- Flashing starts and when completed Cell 0 will turn in to green color.

Download Freedom 251 Flash File:

• Freedom 251 Flash file
• SP Flash Tool
• MTK Driver

How to Flash Freedom 251:

Install MTK Driver.
1- Download the package & Extract SP Flash tool.
2- Out of the icon appearing, Double click on Flash_tool.exe
3- it will launch the tool on your PC, Click on Scatter-Loading appearing on the Right side of the tool.
4- Now, assign the firmware which will be in form “Android_scatter.txt”.
5- Click on Download to start flashing.
6- Switch off your Mobile and Connect it to PC by pressing Volume down or Volume up key.
7- It will lead you to Successful Flashing

Celkon Flash file is the basic requirement while reinstallation or Flashing of Firmware. However, if you are limited to stock ROM you cannot install/flash the device. You need tool to flash the device.
Most of the time flashing fails, because you forget to install Driver. As, most important process to make communication between Celkon phone, smartphones or tablet with the PC or Laptop.
Majority of Celkon Gadgets are powered by –
1- MTK CPU :- MTK Driver Installation
2- SPD CPU :- :- SPD Driver Installation
MTK CPU can be flashed using SP tool and you have to press Volume down as boot key while connecting to PC.
SPD CPU are flashed using SPD tool and use volume down as boot key while connecting to PC.
To download other tools, check Android Flash tool.
Mobiles should be switched off during the process of flashing and 30 percent charged to perform Flashing.
Just Download the Stock Firmware from the page below which act as a support site for free download for any Software related issue. It contain flash file, Flash tool & driver packages.

Download Micromax E451 Flash File:

• Micromax E451 s/w v1.17 h/w DK6C (Lollipop)
• SP Flash Tool
• MTK Driver

How to Flash Micromax E451:

Install MTK Driver.
1- Download the package & Extract SP Flash tool.
2- Out of the icon appearing, Double click on Flash_tool.exe
3- it will launch the tool on your PC, Click on Scatter-Loading appearing on the Right side of the tool.
4- Now, assign the firmware which will be in form “Android_scatter.txt”.
5- Click on Download to start flashing.
6- Switch off your Mobile and Connect it to PC by pressing Volume down or Volume up key.
7- It will lead you to Successful Flashing